Positorq™ Dynamometer Brakes
Designed for High Torque - Low Speed load testing applications (i.e. axles, engines, motors, gearboxes, capstans, winches, etc.). These brakes are fully customizable and built to customer specifications. Capable of precisely providing loads up to 300,000 Lb-Ft down to zero RPM without chatter or hysteresis.
Posidyne™ Clutch Brakes
Pneumatically or hydraulically actuated clutch brakes designed with Oil Shear Technology for a longer service life with very little maintenance. Built for heavy duty, high-cycle applications. Torque ratings range from 46 to 79,000 Lb-In.
Available in Washdown, Marine & Hazardous Duty
Spring-set, pneumatically or hydraulically released brakes designed with Oil Shear Technology for a longer service life and little-to-no maintenance. Can be furnished as rear mount - motor brake or coupler brake for NEMA 56C to 449T motor frames. Torque ratings range from 6 to 2,400 Lb-Ft.
INDUSTRIAL OIL SHEAR BRAKES
POSISTOP & MAGNASHEAR BRAKES
5 to 10 TIMES LONGER LIFE
YEARS OF MAINTENANCE FREE SERVICE
INDUSTRIAL OIL SHEAR CLUTCH BRAKES
POSIDYNE CLUTCH BRAKES
PNEUMATIC OR HYDRAULIC
RELIABLE HIGH CYCLE INDEXING FOR SEVERE DUTY APPLICATIONS
YEARS OF MAINTENANCE FREE SERVICE
OIL SHEAR TENSION BRAKES
POSITORQ BRAKES FOR TENSION CONTROL
10 TO 200,000 LB-FT, UP TO 3,000 THP
SMOOTH CONTROL TO ZERO RPM
QUIET WITH NO CHATTER
OIL SHEAR DYNAMOMETER LOAD BRAKES
POSITORQ DYNO LOAD ABSORBER BRAKES
LOW SPEED-HIGH TORQUE CONTROL
10 TO 200,000 Lb. Ft. UP TO 3000 THP
SMOOTH CONTROL TO 0 RPM
Quiet with no chatter
DYNAMOMETERS AND POSITORQ DYNAMOMETER LOAD BRAKES
Positorq load brakes have been used worldwide for testing High Torque loads at Low Speed. Applications range from large torque wrenches to tractors, off road vehicles military vehicles, helicopters, winches and much more.
Force Control is experienced in building complete dyno systems for high torque—low speed testing applications.
Industrial Oil Shear Clutches & Brakes – Motor Brakes, Tension Brakes, Dynamometers and Positioning Controls
Force Control Industries, Inc. manufacturers superior quality, uniquely designed industrial clutches and brakes. Based on oil shear technology, our industrial clutch and brake products provide superior life, as well as smooth operation and quicker response.
Force Control clutch and brake products are used on many types of machinery in the manufacturing of steel, coal, paper, concrete, brick, lumber, fiberglass, tires, automotive, wire, and many more. Please see our list of application bulletins for more information.
Long Life—Maintenance Free
The Posidyne ® clutch brake provides extremely long life and is an excellent choice for high cycle applications. Additionally, Posidyne ® clutch brakes provide near servo accuracy in many applications. These clutch brakes are either pneumatically or hydraulically actuated, and furnished in several arrangements including C-face, shaft in – shaft out and piggyback mount.
Posistop ® brakes come in several varieties such as motor mounted, double C-face, foot mounted, and hundreds of special mountings. Torque ranges from 50 Ft. Lbs. to 50,000 Ft. Lbs. Utilizing the same oil shear technology as the Posidyne ® clutch brake, these brakes last longer, and engage smoother than the competition. Additionally, they can be used as stopping or holding brakes, with air, or hydraulic actuation, and spring set or pressure set. Many of the Posistop ® brakes are interchangeable with Stearns®, Dings®, Warner®, Nexen® and many other brake manufacturers.
The MagnaShear ® brake is an electrically released version of the Posistop ® brake. Utilizing the same oil shear technology, it offers extreme life, and smooth engagement.
Positorq® brakes are designed to slip at a controlled torque (50 Ft. Lbs to 50,000 Ft. Lbs). These are used in tension applications (paper, steel, etc.) and energy absorbing applications such as dynamometers for testing transmissions, axles, shafts or other components. Our oil shear technology, designed for slip applications, is extremely smooth at low speeds, does not present the stick slip condition of many mechanical brakes, and has a very long wear life, including the drive plates and friction discs.
Many of our applications require a custom design. Moreover, custom modifications are designed to to fit special or old motors, mounting arrangements, space limitations and more. Complete custom drive packages can be designed and manufactured such as motor, clutch brake or brake, and gearbox all mounted on a base plate aligned and ready to install.
Our sales engineers will be happy to work with you to help design the proper package for your application.
Service and support is our primary goal, so when you purchase a Force Control drive, not only does it last a long time, but you get superior support when rebuild or replacement is needed. Our Factory Certified Rebuild service will put your drive in like new condition reducing the chance of unnecessary repairs. Our Emergency Response Service (not for all products) has a unit shipping to you the same day. You then return the old core which is then rebuilt and put back into stock for the next emergency.
Our sales engineers are ready to help solve your drive application. Give us a call at 513-868-0900 or Email email@example.com.