Automotive Offroad Lighting
Motorcycle Electronics
Motorcyle Accessories
Power Management
Automotive Accessories
Outback Offroad Lighting
R&G Racing Sidestand Foot Enlarger for Yamaha FJR1300 ’06-’15
Description
Picking that perfect spot to park your motorcycle is not always possible. Help to keep your sidestand from sinking and toppling your ride with the R&G Sidestand Foot Enlarger. read more
-
Product Documents
Installation Instructions & Manuals
Questions? Call 1-855-255-5550 or contact our sales team
- Description
- Part Numbers
- Fitment
- Resources
- Add a review
Description
R&G Sidestand Foot Enlarger significantly spreads the load applied by your motorcycle to help prevent the sidestand from sinking into hot asphalt dirt or other soft surfaces.
- Aluminum and Stainless Steel construction
- Bolt on design installs in minutes
- Does not affect ground clearance
- Will not interfere with drive systems
2006-2015 Yamaha FJR1300
Part Numbers
| Our part number: | RG.PKS0023.SI |
| Manufacturer part number: | PKS0023SI |
Fitment
Resources
Product Documents
Installation Instructions & Manuals
You may also like…
R&G Racing Aero Style Frame Sliders for Yamaha FJR1300 ’13-’15
Low stock - order soon - usually ships within 24 hours
$110.99 USD Add to cart
Frame Sliders-
R&G Racing Radiator Guard For Yamaha FJR1300 ’06-’15
Low stock - order soon - usually ships within 24 hours
$105.99 USD Add to cart
Radiator & Oil Cooler Guards-
R&G Racing Visor Decal Set
In stock - Usually ships within 24 hours
$2.99 USD Add to cart
Stickers & Decals-
R&G Racing Classic Style Frame Sliders for Yamaha FJR1300 ’06-’12
Low stock - order soon - usually ships within 24 hours
$97.99 USD Add to cart
Frame Sliders-
Featured Video
Related products
SW-MOTECH Sidestand Foot Enlarger for Yamaha FJ-09 ’14-’17
Not currently available to order
Sidestand Foot Enlargers-
Closeout
R&G Racing Kickstand Shoe for BMW S1000RR ’15-’18
Low stock - order soon - usually ships within 24 hours
$59.99 USD Add to cart
Sidestand Foot Enlargers-
SW-MOTECH Sidestand Foot Enlarger for Kawasaki Versys 650 / LT ’15-’20
Not currently available to order
Sidestand Foot Enlargers-
Closeout
Ask a Question
Octavia Nichols –
Will this R&G Sidestand Foot Enlarger for FJR1300 work on a 2021 version?
Thank you
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Zach Elseman –
Yes, this should fit the 2021 model!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Ask a Question
Mike Montey –
Will this fit a 2021 FJR?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
johnj –
I was immediately impressed with the quality and heft of this sidestand foot. No need for an additional plastic enlarger. Expensive but you won’t be disappointed with the best.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
e2b –
If this sinks into anything you probably shouldn’t be parking there. It clears everything in the up position and only elevates a little bit.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Jeffro –
This is a must have product for the Yamaha FJR. It enlarges the kickstand foot print enough to stabilize the bike on softer ground. Gives piece of mind when leaving bike parked on any surface.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mikey –
Perfect alignment with sidestand. No issues with install.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
hoppycock –
I am pleased overall with this thing. It fit exactly and was no problem to install. This would be a 5 star rating if the top plate was made of thicker steel plate. it was bending in the first week. I did hammer it flat again, added lock washers, and used loctite to re-assemble. So far it is holding up, but the weight of bigger bikes seem to bend the thin metal of the plate. 1/4 inch steel would be a major improvement. I will probably go to a machine shop and have one made when this bends again.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Les –
This a nice piece of equipment. Well made. Perfect fit.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Pleased –
It is a well made and good looking product which was easy to install and does what it’s designed to do.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal